Turbo engine system

  Supercharged engine's various core components, including turbocharger and intercooler itself. In addition to these "big", there is a very important component "pressure relief valve." At present, because of the low pressurized manner commonly used, it is a relief valve on the engine output power will play a crucial part, through the relief valve control, saab 95 turbo the same engine tend to have different output characteristics.

Wastegate to maintain the maximum supercharging pressure and the turbine for the purpose of protection

Civil generally have a low boost the value of the engine characteristic "torque platform", this characteristic is due to the pressure relief valve is maintained at a fixed boost pressure level generated. If you let the turbo boost pressure to provide the excess re-released, equivalent to allow the turbine to do useful work, not only futile but also shorten the life.saab 93 turbo Therefore, constant pressurization relief valve is installed before the turbine, when the exhaust pressure is too great when he let go directly to the waste.

Put gas in two ways: one is to go directly into the air, one is bypassing the turbine, the exhaust pipe on the go. The former because of noise, pollution of the environment, has been rarely used in civilian cars, generally used only in special individual high pressurized vehicle.

This pressure relief valve due to poor working conditions, is still using mechanical control methods. By the introduction of the intake pipe pressure, the pressure limit is reached when the boost value, the valve push rod, a portion of the exhaust gas to bypass the turbine directly into the exhaust pipe. This is to protect the engine at rated boost pressure, racing parts for sale and also avoid the long-term high speed turbine and early failure, protect the engine and turbo role

Proper use of the turbocharger 4

4.1 Start Notice
After starting the necessary supercharged engine idling 3 ~ 5 min. Because the turbocharger oil supply from the engine oil pump, the engine is started, i.e., the booster pump starts to work and at the same time, but the supply line between the booster pump and the machine is long, and most of the pressurized installation position is higher than the engine, oil supply will produce hysteresis. Idling booster carrying a small load, less oil and oil impact, but if the engine starts immediately after the throttle speed full load of work, because the turbocharger oil supply will inevitably lead to poor lubrication and damage lag.
4.2 correct shutdown
Booster must be idle for 3 ~ 5 min before engine shutdown and then shut down, because of the sudden stop, the oil pump stops running, no longer supplying oil to the supercharger, and turbocharger rotor speed is high, in the inertia to rotation period time to stop, turbocharger will be in the short-term non-oil lubrication, easy to make the rotor shaft and bearing wear and damage. At the same time due to the high heat load turbocharger, exhaust pipe coupled to a high-temperature gas turbine and rotor shaft conduction,WRX Coilovers if the rotor shaft will immediately stop the formation of large temperature gradients. Suddenly stopping the oil circulating in the absence of circumstances, can easily overheat due to thermal expansion of the rotor shaft the rotor shaft and bearing seizure.
In short, the user must be strictly in accordance with the requirements of the operating instructions for proper operation, as the three major role to play lubricants (lubrication, decontamination and cooling), gt1544v turbo try to avoid artificial and unnecessary trouble leaving the supercharger damage and scrap, thus ensuring proper turbocharger life.
engine parts uk

Car Parts

To enhance the performance of the car, there are several components that must be promoted, first to strengthen the frame, suspension and braking systems, and finally to the power system. Whether modification, frame strengthening modification or street car racing is a must, but we modified approach is slightly different, and even some modified car owners is modified to mimic the way to improve the rigidity of the frame for their vehicles, in on our website have also reported frame strengthen domestic parts manufacturers and famous Japanese manufacturers have done to strengthen the frame test, to prove, that is not installed on the frame when the frame reinforced parts, the frame will be deformed , and after the frame for strengthening the rigidity of the frame can be improved, but also the problem of deformation does not occur.

Because of the cost, or some other reason, so that when the vehicle factory, a rigid frame will generally weak, weak frame under normal circumstances driving course without any problems,engine parts, but at high speeds the case, to be lane changes, or when turning, there will be a dull feeling, no motorists driving long-term strengthening of the vehicle frame or is not much sense, but when driving without driving too intensive re-frame reinforced after when the frame of the vehicle, this feeling will be more obvious, in fact, the reason is very simple, because the vehicle is turning, we must first overcome the inertia of a forward before steering, there will be a certain degree of lateral G force turn, this G force increases as the speed increases. This frame must withstand the G-forces in the steering, which is the center of gravity of the body will focus on one side, while the front and rear shock body force is transmitted directly to the frame, the frame will therefore be weak top to deformation. Metal fatigue has a certain strength,turbos for sale, a slight deformation watch is no big problem, but over time, the metal frame over a certain fatigue strength, it can not be reset, the frame is permanently deformed, and that such a situation does not reduced, will only continue to deteriorate, so be reinforced frame has an absolute necessity.

Common frame reinforced parts for a number of struts, they generally have high rigidity, can be connected to the frame, and the frame with a lateral G-force against suffering. In fact, there are still a lot of people are not fully aware of the frame to strengthen the role of parts, took the top bar before we called it the tower brace, specifically what effect?exhaust manifolds, When the vehicle is subjected to lateral G force in steering, suspension compression side wheels and the wheel arches make the tower deformation, and the top of it's role is to shore up the sides of the tower, so that the wheel arches are not deformed.

Strengthen the body parts have very many choices, some domestic manufacturers of self-developed products, there are some well-known foreign manufacturers specially developed. How to choose really depends on the preferences of the buyers themselves, modified car culture has developed in the country a relatively long time, so some domestic manufacturers have their own research, to develop models for the domestic, but also through after repeated testing, in terms of quality has also been a certain guarantee. Of course, there were also some small flaws, but the price is also relatively cheap, quality parts, whether foreign or aspects of the production process to ensure a high, but instead, the price will be higher.

Related articles: http://ameblo.jp/soholy/entry-11919906780.html http://yaplog.jp/soholy12/archive/56 http://blog1.de/soholy/3158175/The+above+described+three+shock+absorbers+are+street+orientation.html

Chinese car turbochargers only 22% coverage

Energy conservation has been a concern for the car industry and the owners of topics. According car turbocharger manufacturer Honeywell seminars, compare the output power equal natural aspirated engine,universal turbo, turbocharged skills can be increased by 20% fuel power gasoline engine, a 40% increase in fuel power diesel engines, together up to 30% reduction of exhaust emissions. According to Honeywell estimates, currently all share the turbocharger from various manufacturers on the Chinese car mall about 22%, performance parts, compared with 2012 high three points. They turbocharged vehicle sales in China to make a guess: the mall will double the size of 500 million units this year to 10 million units in 2018.
(TEDA) on the World Forum, vice president and general manager of China and India, Honeywell Transportation Systems Group Daipeng Jie (David Paja) when subjected to NetEase car show interview conducted in 2013, China's car industry, held September 8, the European new car (includes passenger cars and commercial vehicles) turbocharger coverage has reached about 70%, while the nearby China and the United States are about 20 percent, in the future five years, the Chinese new car turbocharger coverage will increase to about 30% or 35%.
In addition, he indicated that the current Chinese sideways 20% PM2.5 emissions from cars occupation, which 20% have more than 90 percent sideways from diesel vehicles, diesel vehicles use if to say very good skills,renault turbo, say VNT's variable geometry skills can make PM2.5 emissions dropped more than 70 percent.


Related articles: http://www.clubdistrict.com/blogs.php?mode=read&bid=76397 http://jamendo.socialparody.com/blog/read/12100939/in-the-difficult-situation-of-distress-change-can-not-wait

Jane Tan turbocharger technology

Many people do not know the specific role of the automobile engine turbocharger matching, let's briefly talk about:

A turbocharger of the other end of the intake port, and an engine exhaust pipe is connected, this technique greatly increases the engine cylinder intake air, increasing the oxygen content in the cylinder, and therefore, engine parts, the fuel in the cylinder to obtain a more complete combustion, thereby improving the economy, the automobile more power.

Two, the turbocharger increases the engine's torque, but also increased the engine's performance, which our computer called "overclocking" almost, but turbocharger technology is increasingly subject to a number of new national policy support, more access to a wide range of applications.

Third, the rotor is an important part of a turbocharger, the working environment is often the high temperature and pressure, and therefore the material, processing, has a very high technical requirements.volvo turbo, The turbocharger to increase the engine output torque and horsepower.

Related articles: http://jamendo.pagina.gr/blog_466008_-Alliance-for-turbocharger-provides-maximum-support.html http://jamendo.infored.mx/blog_466010_-Buses-and-other-vehicles-have-proven-gas-control-turbocharger-car.html

Carlsson C25 Super-GT sold out

The first volume Carlson C25 Super-GT will be flown to Shanghai, and the remaining six will be held within the next 12 months to complete the hand-built by technicians and complete delivery of the vehicle. Worth 4 million yuan limited Carlson C25 Super-GT combines the superior acceleration performance and a comfortable ride control and feel, quite suitable for the Chinese market buyers.
Comments: It is now China's wealthy bigwigs started buying foreign tuner play, and really nothing is impossible in China.
Chinese market exclusive limited production 7, coilover kits, has sold out of Carlson C25 Super-GT is the tuner Carlsson Autotechnik GmbH was acquired by China Zhongsheng Group, announced the first car modified car models in China listing.

Mercedes-Benz SL roadster coupe, based on the build Carlson replaced by lightweight carbon-fiber body panels, so that reduce vehicle weight 180 kg. Technicians also for C25 Super-GT fitted with newly designed front bumper, rear lamps set well back seat and rear windshield. To enhance handling, C25 Super-GT is equipped with composite brake system and the C-Tronic suspension.
If you are pursuing big horsepower output buyers, aftermarket engine parts, then you may have disappointed. Carlsson C25 Super-GT does not carry the SL600 that Taiwan has 753 maximum horsepower and 1150 N • m maximum torque output of the 6.0 l twin-turbo engine, but equipped with a V8 Carlson has 450 maximum horsepower output power systems.

I hope phoenix city should continue to support and promote the turbocharger industry to the international cutting-edge

"Xing Min said," No matter what kind of business model innovation, and what kind of development thinking, only the combination of local industries, as long as there is conducive to industrial health, coordination, rapid development, we should give sure, and to support it, I hope phoenix city should continue to support and promote the turbocharger industry to the international cutting-edge, in the grasp of industrial technology innovation, and take the road of independent innovation, we should be good at using market-based instruments and policy control means scientific norms Local turbocharger market, and promote healthy competition,turbocharger, encourage independent design, independent innovation, foster brand-name products with competitive ability, enhance regional turbocharger industry's core competitiveness, and make greater local economic development as well as the rise of China's auto industry contribution! "
   
    One of Germany's largest industrial companies - Bosch Group (BOSCH) product sourcing and quality management review team had come to Phoenix city car booster supporting product development capabilities and production management conditions, and Fengcheng turbocharger technology Alliance production of turbocharger impellers, thrust bearings, product quality and process innovation regulator, exhaust valve and floating bearings give full recognition and praise, turbochargers and Accessories become a supplier Bosch Group, Phoenix Cities are thus caught up production base to supply the international level.
   
Under the leadership of Liaoning Province automobile engine turbocharger industry technology innovation strategic alliance with a division specialized industrial patterns, quickly turbochargers and related products to market. turbo suppliers, As one of the automobile industry chain to enhance engine power capacity of the strongest and most significant energy saving technologies and products, turbocharger has great potential and broad market space, turbocharger cluster output has increased steadily in 2013, Fengcheng industrial clusters turbocharger output for the first time exceeded 10 billion mark, engine parts, initially formed a turbocharger based automotive parts development pattern.

Related articles: http://masemily11.blog.co.nz/2014/09/02/seize-parts-companies-are-busy-mall/ http://maxspeedingrods.metroblog.com/turbocharger_technology_sweeping_the_gasoline_market http://maxspeedingrods.myblog.de/maxspeedingrods/art/8046305/AMG-Benz-officially-became-a-division-of-the-company