NISSAN S13 180SX

In visits BEE ☆ R workshop, I discovered a buried very deep S13, has been parked at the corner of the shop, after after understanding that this car is used to practice drift Imai-san the special vehicle,coilover suspension after years of temper D1 GP, BEE ☆ R for drift car modification is expert in.
The reason why I was able to find it in the corner, precisely because it is equipped with BEE ☆ R's front wheels and a big dip.
The reason why I was able to find it in the corner, precisely because it is equipped with BEE ☆ R's front wheels and a big dip.
Carbon fiber hood open,coilover suspension kit you can see an improved SR20DET engine, in order to be able to squeeze more horsepower, Imai-san put it GT-RS turbines produced from HKS and turbo pressure adjustment to 1.0Bar at the moment you can devote 400's power, for a drift car, it has been a lot of fun, is not it?

Strong storm modified version released TIKT Corvette C6 ZR1

Corvette ZR1 is not a model can be taken lightly, it is 476 kilowatts of power,turbo suppliers uk torque of 819 Nm. Even in the eyes of the discerning European fans, it can also be regarded as a great power models.
The modified manufacturers from Germany TIKT a modification of the internal code name for XXX's Corvette ZR1, and it increased to 566 kilowatts of power, increased torque 910 Nm.

However the initial conversion, the data is not stable. So TIKT readjust valve seat, so that the power and torque finally stabilized. These adjustments also makes cooling system can use three times more coolant to cool the engine.
With the addition of extra motivation,coilovers TIKT hope but also to upgrade the suspension. They retained the original rear leaf springs. And installed at the front suspension shock absorbers.

Also TIKT redesigned front fascia, the purpose is to increase the number of additional packages radiator cooling. In addition, installation of a new skirt wing and carbon fiber rear wing.

Related Articles:https://www.diigo.com/item/note/4i3dd/d7tb http://jamendo.propertybuzzer.info/ac-schnitzer-x6-put-on-a-new-design-for-aerodynamic-widebody-kit

4 turbo conversion

For driving turbocharged vehicle owners, there is a modified product that we are very encouraged to install, and that is the delay flameout device (TurboTimer). Since the turbine itself actuation extremely high temperatures, if immediately turn off, in the case of rapid cooling, for damage of the turbine has a certain effect when the vehicle is traveling.turbos for sale Also inside the turbine impeller rotating floating bearing rely on engine oil injection to the role of wear, lubrication and cooling, parking stall immediately lead to an immediate stop to the oil supply, while still bearing high-speed rotating inertia. As a result, bearing life will be greatly reduced, the turbine will be shortened by.
Therefore, when we drive turbocharged car, before the flame is best to let the engine run at idling more than 3-5 minutes, if you feel that this action some time and trouble, then we recommend that you delay the installation of flame failure device, so the timing device for you 3-5 minutes to perform this work. In general, the installation of the delay extinguishing device of the vehicle itself will not have any adverse impact on the line.
Turbocharged vehicles in addition to the delay flameout device, there is a good product that is modified pressure relief valve. Typically intake relief valve can be divided into two kinds of relief and wastegate,turbocharger manufacturers wastegate most use on high-powered vehicles, but the price is higher, in this, we are talking about the pressure relief valve specifically refers to the intake relief valve. When the turbo actuator, the internal will produce high pressure turbine body although the release of high-pressure gas aperture, but the face of continuous pressurized, still appears to be insufficient, can borrow from the high-pressure gas relief valve to be quickly released, in order to facilitate a boost next action. This not only protects the turbine, but also eliminate some of the turbo lag (TurboLeg) phenomenon.

Related Articles: http://jamendo.meopost.com/2015/01/20/third-upgrade-ecu-fuel-consumption-will-increase/ http://blog1.de/jamendo/3330411/In+determining+the+shock+absorber+problem+or+failure.html

An excellent exhaust pipe design takes considerable cost to complete

An excellent exhaust pipe design takes considerable cost to complete. In the engine does not make a substantial modification of the premise, only to replace the exhaust pipe, in effect, is not very obvious. Nowadays,turbocharger uk many people still in the tail section to replace the exhaust, catalytic converters will be removed, a move certain to increase the emissions, standing environmental standpoint we are opposed to this practice.
In addition, the choice of the exhaust pipe, the size of the silencer tube is one of the key. Generally, the larger the barrel silencer for noise control is also ideal, on the contrary, the smaller cylinder exhaust noise silencer will bigger, but also with noise suppression exhaust pipe material, pipe barrel design and silencer cotton material are closely related.
Engine articles
Enhance the dynamic performance of the most effective way is to modify the engine system, the first computer modification. As the current vehicle more sophisticated, and therefore such as speed limit, speed limits, ignition timing, air-fuel ratio adjustment so by the trip computer to perform, commonly referred to as simply modified computer control chip to be replaced,turbocharger for sale by the by different setting has improved the performance of the vehicle. Change the computer can be defined by the original speed and the speed to be lifted, but when used to pay more attention.
Long-term high-revving engine in the state, for the internal parts have a very serious impact on the loss, if the speed limit will be lifted in and enjoy the pleasure brought back high speed is accelerated to reduce engine life. As for the lifting of restrictions on the original speed for safety, from a security point of view, we do not agree. Because each car factory, factory will be based on the performance and structure of the vehicle itself, there are certain limitations on the speed, safety first is the main consideration the move.

Related Articles: http://maxspeedingrods.freeblog.biz/2015/01/20/cleaning-automotive-air-conditioning/ http://jamendo.blogtur.com/14056115/Electrical-conservation%3A.html

Street car (ie open our own car in everyday life) does not modify the above circumstances

       Street car (ie open our own car in everyday life) does not modify the above circumstances, it can not be done so extreme, it can not be made solely for the pursuit of speed at the expense of everything. In addition to the need to comply with environmental regulations and other automotive safety outside the car when the refit durability, practicality,saab 95 turbocharger weather resistance and adaptability to cope with different road conditions would have to make a comprehensive consideration, are indispensable. But on the other hand, modified street cars did not match regulate, fans can play as freely according to their own preferences. Now the street car modification roughly divided into two main directions: First, personalized modifications, their pursuit of beauty or unconventional appearance modification, which can flourish with personal preferences; the other is focused on the performance of a performance, for improved performance modification, pay attention to the place very much. "Conversion story" in this column is the main analyze the performance of a variety of situations for deconstruction modified.

       "Harmony" and "balance" concept modification

       In front of their cars for modification, 452204-5005S Turbocharger you need to think clearly, "Why modified" and "in the end, what changed?" The best is a thorough understanding of the original car in all aspects of performance, find deficiencies brought measurable benefits and refit disadvantages and then begin modification, not just hearsay, hear certain parts bought put something good on.


Related Articles: http://jamendo.propertybuzzer.info/second-the-common-car-exterior-decoration http://promoclanek.cz/2015/01/12/attention-to-the-impact-on-the-safety-of-car-modification/

Second, according to the fuel injection mode Category:

       A continuous jet, also known as mechanical jet, nozzle when the engine is running at constant fuel injection, and injection quantity is controlled by varying the supply pressure to achieve.

       2, jet program, the use of electronic fuel injectors, the fuel injection nozzle when required coil is energized, because the magnetic force of the plunger and raise up the injector nozzle can.vw passat 1.8 turbocharger Fuel injection quantity is controlled by the length of the fuel injection time, in microseconds (ms).

       Due to mechanical injection is an outdated design, so far, almost all types of vehicles on the market using the efficiency and economy better jet program. The single point of injection in addition to lower prices, simple structure, but also without any comparable multi-point injection and place, and it comes with a lot of the same disadvantages and carburetor (low efficiency of each cylinder uneven distribution of oil and gas), passat 1.8 turbocharger and therefore multi-point injection (MPI) can be said to be the mainstream of modern jet fuel supply system.


Related Articles: http://www.xtrablog.com/jamendo/64908/ http://turbo-for-sale-uk.coin-lecture.com/supercharged-articles-of-conversion-tips-189140.html